Filter By:
- Show More Brands
- Show Fewer Brands
Handlebars
$110.00
The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's new Service Course bars, at 128mm of drop. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into his or her optimal position. The SL-70's flattened top provides a better fit to the hand and is clip compatible.
- 7050 aluminum for light weight and durability
- 70mm reach and 128mm drop for a short-low position
- Flattened top shape to better fit the hand
- Clip-on Compatible
- ISO 4210 compliant. See Declaration of Conformity for details.
- Ramp angle: 10°
- Outsweep: 4°
- Backsweep: 0°
- Drop shape Variable
- Clamp width 120mm
$144.15
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$20.99 - $38.06
Lightweight aluminum construction with a versatile riser bar design.
$45.00
Specialized Alloy Mini Rise Handlebars area wide handlebar made of premium alloy with a minimal 10mm of rise.
- High-strength 7000-series premium aluminum alloy
- Rise: 10mm
- Width: 750mm and 780mm
- Clamp diameter: 31.8mm
$56.95
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. For added stability we've added 12 degrees of flare at the drop to give that wide stance.
- Constructed from 6061 Butted Aluminum for a high-strength design.
- 15mm rise provides a wider range of fit.
- Shallow Bend Drop: 103mm drop x 70mm reach x 12d flare
$600.00 - $609.95
The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory.
AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference.
LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made.
FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar.
- Aerodynamically engineered to save 4 watts vs a traditional aero road bar
- Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts
- Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm)
- Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops
- Stem Angle: 6-Degrees
- Steer Clamp Diameter: 31.8
- Weight: 310 grams (100mm x 420mm)
- Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible)
- Compatible with Roval bolt on computer mount, S219900058.
- System Weight Limit: 275lbs/125kg
$618.00
Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Cockpit the lightest one-piece bar/stem combo that passes our standards; at 255 grams (110 mm x 420mm). Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist Cockpit's round tube shape and tradition bend respect tried and true forms, but the optimized composite layup and internal cable routing are decidedly modern. Available in 10 sizes, there's one that will fit you perfectly. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back.
- Bend: Tradition radius ( 125mm Drop / 75mm Reach)
- Clamp Diameter: 31.8
- Compatibility: Shimano, SRAM, Campagnolo; Di2 and EPS
- Material: Advanced carbon composite
- Sizes: 400 mm x 80/90/100mm; 420mm x 90/100/110/120mm; 440mm x 110/120/130mm
- Stem Angle (Rise): 6-Degrees
- System Weight Limit: 275lbs / 125kg
- Weight: 255 grams (110 mm x 420 mm)
$309.00 - $309.95
Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge.
- Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar
- Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at
225g (size 42cm)
- Innovative features, like textured tops and a smooth bar tape step, enhance your
experience
- Bend: 125mm drop x 75mm reach
$226.59
- Lightweight UD carbon construction
- Cuttable bar-ends
- Matte carbon finishing
- Weight 160g
- Di2 compatible with internal wire routing
- 720mm wide
- 31.8mm clamp diameter
- 5mm rise
$279.95
With its unidirectional carbon construction, the SL-K Compact handlebar is ready to race. It features the latest evolution of our compact bar shape, with a shallow 125mm drop and gentle flare. A wide center section gives ample room to mount accessories like GPS units or lights. The areas where the stem and levers clamp have additional reinforcement and a textured finish to avoid slip.
- Aerodynamic Integrated Cable Routing (ACR) compatible
- Semi-integrated Cable Routing (SCR) compatible
- Continuous UD carbon Monocoque construction
- Reinforced and textured clamping areas
- 120mm wide round center section makes it easy to mount accessories
- New internal cable routing options for Di2
- Bar Clamp Diameter: 31.8mm
- Bar Reach: 80mm
- Cable Routing: Internal
- Bar Drop: 125mm
- Flare: 4
$199.95
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$400.00 - $412.00
The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort.
- Application: Road Race, All-Road, Gravel, Cyclocross
- Sizes: 38cm, 40cm, 42cm, 44cm, 46cm
- Weights: 243g, 245g, 248g, 262g, 280g
- Full Integrated Internal or External Routing
- Lifetime Incident Protection and 5 Year Factory Warranty
$49.99
The Bontrager Comp VR-C offers a compact design and slightly shallower drop while still retaining the classic Variable Radius shape, providing quick, comfortable transitions from the hoods to the drops for sprints.
- Custom-butted, 6061-T6 alloy construction
- Variable Radius Compact (VR-C) design allows longer reach and drop
- Compatible with clip-on aero bars
- Shot-peened finish increases fatigue life
- Laser-etched brake lever position lines for spot-on control setup
$99.95
The drag-defying profile of Bontrager's Elite Aero VR-CF Handlebar is proven to save up to 23 seconds per hour over a traditional round handlebar. Take advantage of the shaped 6066-T6 aluminum and internal routing, and bring your ride's aerodynamics to the next level.
- Custom-butted, 6066-T6 alloy construction
- Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions
- Compatible with clip-on aero bars
- Aero drop bar profile is more aerodynamic compared to traditional round bars
- Internal cable routing for Di2 and standard housing
- Laser-etched brake lever position lines for spot-on control setup
- UCI compliant
$185.39
Trek's lightest MTB handlebar offers an oversized 35mm clamp diameter that adds strength and saves weight.
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- OCLV Carbon construction is the benchmark for durability and light weight
- Shifter and brake lever position lines for spot-on control setup
- 4 degree upsweep and 9 degree backsweep optimal for XC and trail
- Trim Lines allow personalized fit
$185.39
A 35mm OCLV Carbon handlebar that adds strength, saves weight, and maintains compliance on rugged MTB trails.
Pin it to win it
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversize 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain.
Product details
- Pro-level quality handlebar in oversize 35mm clamp diameter offers increased strength and minimal weight
- 15mm and 27.5mm rise options to dial in the perfect hand position
- Brake and shifter lever position lines for spot-on control set-up
- 40mm of cut marks on each side for easy width customization
- OCLV Carbon construction is the benchmark for durability and light weight
$334.74
Unparalleled comfort
A carbon road handlebar with IsoCore that reduces road vibration by 20% and features a variable compact radius that offers additional ergonomic positions.
Chain-rattling pavement is no longer an issue thanks to our innovative IsoCore technology in this Pro IsoCore VR-CF road bar. An additive to the carbon layup, IsoCore mutes 20% more vibration than other carbon bars. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Once you experience the comfort and control of IsoCore, you'll never want to ride another bar.
- OCLV carbon with IsoCore continuous inner-laminar technology
- Replaceable IsoZone EVA pads maintain original grip diameter
- Variable Radius Compact Flare (VR-CF) bar shape offers greater comfort in all hand positions
- IsoCore technology decreases road vibration by 20% over traditional carbon bars
- Compatible with clip-on aero bars
- Includes four replaceable EVA IsoZone pads for tops and drops
- Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
Page 1 of 1