Filter By:
- BMX (3)
- Bottom Brackets (7)
- Brakes/Levers/Pads (16)
- Cables (11)
- Cassettes/Freewheels (7)
- Chainrings (7)
- Chains (13)
- Cranksets (2)
- Show More Categories
- Derailleurs (5)
- Handlebar Grips/Tape (24)
- Handlebars (2)
- Headsets (4)
- Pedals (12)
- Saddles (6)
- Shift/Brake Combinations (3)
- Shifters (6)
- Stems (8)
- Other (37)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$29.95
Zipp's Service Course Bar Tape offers excellent cushioning and a fine grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
$34.95
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
$22.66
Zipp Speed Weaponry Aero Bar Parts
- Armrest pads are not included
$30.85
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
$30.85
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano's current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It's an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter.
- Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs
- CNC machined from 6061-T6 aluminum with stainless steel bolt
- Does not change the derailleurs total chain wrap capacity
- Fits standard derailleur hangers only
- Best used with Single or Double Setups - see manufacturer's site for more details
$22.61
Roadlink Rear Derailleur Part
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details
$44.95
Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs
$34.60
- Aluminum cable crimps to prevent frayed cables - 1.2mm for shift cables or 1.6mm for brake cables - Silver aluminum - 250-count bottle
$32.00
Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with quick release rear hub. This is not a complete QR conversion kit. It is only a replacement hanger. For a replacement hanger when using the 135x12 SCS thru-axle wheel, use Wheels Mfg DROPOUT-284. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included
$21.63
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$21.63
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$27.04
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$32.96
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$27.81
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$30.90
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$36.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$22.66
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$35.02
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$32.96
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$22.66
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$30.85
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$28.84
Wheels Mfg Extended Hanger lengthens your existing hanger 21mm to provide clearance for larger rear cogs. Fits all standard mount hangers.
- CNC machined 6061 aluminum
- Includes steel fixing bolt
- Red anodized finish
$32.96
Genuine replacement parts
Get back on the road with a quality replacement hanger.
Original equipment replacement rear derailleur hanger.
- Original replacement rear derailleur hanger
- For use with 2008-2010 Trek Madone
$20.59
Get back on the trail with a quality replacement hanger.
- Trek/Fisher full suspension rocker pivot suspension hardware
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut
$33.94
Genuine replacement parts
Genuine Trek replacement part to unload the battery.
Original Equipment specifications.
Compatible with Bosch Powertube RIB batteries.
- The handle comes with the spring and RIB handle Spring loaded plunger
- Hardware should be ordered separately
$20.55
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
$36.95
Replacement cleats for RXS pedals, featuring "Cafe" profiling, which means that when you walk into your local coffee shop for a mid-ride refreshment, you don't risk slipping and falling on the tile floor.
Page 1 of 6
Next page